How to check the life of your DI2 battery, and a common mistake to avoid
May 4, 2016This clip shows you how to check the life of your Shimano DI2 battery. There is a common mistake many people make and I show you what not to do, and what to do.
How To's Index
- Riding and racing on wet roads
- Going to the Tour Down Under?
- How to adjust your rear Shimano DI2 gears
- 3 crucial elements to endurance racing success, by PB3
- How to set your saddle height
- Remember the small things before a race!
- How to check the life of your DI2 battery, and a common mistake to avoid
- Tips for changing your worn cleat
- Tips for packing your bike for air travel
- When and how do I check my chain for wear?
- How to take your back bike wheel off
- How to adjust your hydraulic disc brakes
- How to use a CO2 inflator for a bicycle tyre
- Check your tyres for glass / debris
- How to change your cassette
- Move and grease your seatpost around at least once a year
- Putting your skewer on correctly
- How to remove and install your rear derrailleur for travelling
- Why you have to change your bar tape
- Adjusting your gears using the barrel adjuster
- How to lube your bike and which ones to use
- How to change Shimano/SRAM brake pads for a road bike
- How to change a punctured tubular (for triathletes and time triallists)
- How to remove and install a TIGHT tyre without pinching the tube (applies to loose tyres too)
- Servicing your bike before special events
- How to properly install and remove pedals
- How to adjust your headset
- After your bicycle service
- Maintenance and care in between services